Hey guys i have a 48T in the shop that is really giving me a headache.... It was brought in the shop with a complaint of no tx, well in put it on the bench and everything was working fine and then it started tx would drop out then come back and the longer i messed with it the worse it would get,, so i flexed the board and checked solder joints and nothing so i set it flat on the bench with component side up and keyed the mic,, nothing,, i touched the frame by mistake and it keyed up let the frame go and it unkeyed so i touched the frame again and it keyed up so yeah the headache started.... when it does key up the radio works flawlessly....... any help with this would be greatly apreciated......
thanks
Dean