The Electronics Universe
Over The Air => Home Brew And Tech Forum => Topic started by: k9yli on March 04, 2009, 10:01:11 AM
-
I just finished my third copy of the ARRL HANDBOOK 28 volt power supply,
modified to 13.8 volts.
I started with a 44volt 16 amp transformer purched for $5 at a , you got it,
a farm show flea market..
Using a digital volt meter and a sharp tool I found the exact center of the output winding within a few hundredths of a volt.
I cut the winding with a dremel tool and added two wires to parallel the windings , making a 22 volt 32 amp winding.
Built the whole thing in a cabinet from a TV sweep generator.
I used a different output transistor than the 3055s called for.
I used a 30 amp version.
With the sheetmetal work etc, I have abut 40 hours in it.
Get out there and build.!!!!!!!
I have ictures but can\'t figure out how to insert them. right clik image doesnt work
-
K9yli,
I moved this over here in Home Brew so it would get more attention. I left a redirect in radio. Good job on the Power Supply. Post us some pics if you can.
73
Chris
-
K9yli,
Good job on the supply.
To post the pic you will need to shrink it in size. The web host will not accept large files.
Click, manage attachments>browes>upload>close window.
That should do it.
I will try a test file.
-
i\'ll try this.. first version
it worked. transformer was too tall for original case.
-
second version.
built in surplus rack mount.
-
try again. internet problem
third version..
-
the third innards. not complete here .
-
AH this build is killing me. i was expecting something not as bad. i just got this kit a couple of days ago and am having a killer time attaching the lower piece to the upper piece. also must everything that says "put locktight" have to have it? im guessing it would be a good idea...? Just let me know. Cheers,Vanka
-
don\'t have loctight???
just use a little finger nail polish....
or some silicone sealer,/ tub and tile sealer..
moist any glue.
just a dab as you may want to remove it some time.
red bottle locktite,, stays some what soft so easy to remove but wont vibrate loose.