Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - The Radio Shop

Pages: 1 ... 5 6 [7] 8 9 ... 54
91
Test Equipment / Re: Hickok Model 388 Digital CB In Line Tester with Freq Counter, Watt / SWR Meter
« on: February 19, 2018, 11:46:13 AM »
Hi Jeff,
I am sure I do not but I will look around and see if I can locate one.

92
Ham Radio Circuits and Repair / Re: President HR 2510 CPU/PLL issues
« on: February 19, 2018, 11:45:24 AM »
BTW,
Welcome to the forum.

93
Ham Radio Circuits and Repair / Re: President HR 2510 CPU/PLL issues
« on: February 19, 2018, 11:45:08 AM »
The main thing with these radios are capacitors in the CPU board. They are terrible for going leaky. Also any of that old yellow glue needs to be removed.

94
Test Equipment / Re: Com Ser Laboratories tear down possible repair
« on: February 19, 2018, 11:43:26 AM »
Hi and welcome.
Mine is in very bad shape. I have basically gave up on it. The information I have here is about all that can be found.
Was hoping to find another one of these one day and use mine as parts to get one up and running.

95
CB Radio Repair manuals and documentation / Re: B&K 2040 service manual
« on: February 19, 2018, 11:41:37 AM »
Let me look around more and see if I have them on a drive somewhere.

96
Electronic Video Blog / Re: #145 Comments Updates Giveaway Winner
« on: February 11, 2018, 08:17:19 PM »
Thanks and welcome

97
Other Electronics and repair / Re: needing the bk 1040 operator and service manual needed
« on: January 27, 2018, 07:51:58 PM »
http://gokarters.com/smf/index.php?topic=2396.0

There you go,

98
Other Electronics and repair / Re: needing the bk 1040 operator and service manual needed
« on: January 27, 2018, 07:48:50 PM »
Let me look, I still have them somewhere

99
Ham Radio Circuits and Repair / Re: Reprogramming a Icon IC-745 ram board
« on: December 29, 2017, 07:39:58 AM »
GALEP 3 programmer

100
Ham Radio Circuits and Repair / Re: Reprogramming a Icon IC-745 ram board
« on: December 28, 2017, 07:35:04 AM »
Bin to hex converter

101
Ham Radio Circuits and Repair / Re: Reprogramming a Icon IC-745 ram board
« on: December 17, 2017, 03:24:17 PM »


745 hex
http://jvgavila.com/soft_ham/icom/IC745FIN.HEX

745 bin
http://jvgavila.com/soft_ham/icom/IC745FIN.BIN

102
Ham Radio Circuits and Repair / Re: Reprogramming a Icon IC-745 ram board
« on: December 17, 2017, 03:02:04 PM »
Icom programming program

n2cbu
http://jvgavila.com/soft_ham/icom/ICOMRAM.ZIP

103
Ham Radio Circuits and Repair / Re: Reprogramming a Icon IC-745 ram board
« on: December 10, 2017, 03:45:05 PM »
This is the RW3XA programmer

104
Ham Radio Circuits and Repair / Re: Reprogramming a Icon IC-745 ram board
« on: December 10, 2017, 03:44:03 PM »
This is the N2CBV programmer



105
Ham Radio Circuits and Repair / Reprogramming a Icon IC-745 ram board
« on: December 10, 2017, 03:43:20 PM »
This is a project I will be working on. There were several DOS base programmers made to read and write the content of the ram boards for the 745 and 751 radios.
The problem is they were all DOS base and used the computers printer port to send and receive data.

What I like to do is come up with a USB based programmer to do the same.

I will be adding lots of files and pictures to this thread over the next few days.

Pages: 1 ... 5 6 [7] 8 9 ... 54