The Electronics Universe

The CB Forum => CB Radio Repair Forum => Topic started by: Kevinrea on November 15, 2020, 11:43:23 PM

Title: Jc penney 6241 off freq
Post by: Kevinrea on November 15, 2020, 11:43:23 PM
Hi guys,
I have a JC PENNEY 6241 radio.
It is a 40 channel AM SSB radio.
When I received it the transmit did not work, I then proceeded to undo all of the modifications such as clarifier extra channels and put it back to stock. I believe I got everything out, now It transmits and receives but it's about 7 KC's low on frequency, checked with freq counter and my spectrum analyzer, idea of what I might do to get this thing on freq ??

Here's a link up on one of my websites to the same photo facts for this model, if you guys would like to dig into the schematic.

[https://hamlogbook.com
/SamsPhotofacts235forjcpen ney6241.pdf]

Thanks,
Kevin Rea
Lancaster, Calif.

Title: Re: Jc penney 6241 off freq
Post by: Snow Bird on November 17, 2020, 02:49:27 PM
Check your Caps At the Mixer They are getting old and can go bad