1
New member welcome / Re: hello as they say.
« on: January 08, 2020, 11:54:15 PM »
I agree!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
New member welcome / Re: Happy New Year and Hello from south east Texas
« on: January 07, 2020, 08:46:06 PM »
Welcome to the forum Texas Hillbilly!
3
New member welcome / Re: Hello from Ohio and Merry Christmas 🎄
« on: December 24, 2019, 02:01:14 AM »
Merry Christmas to you!
4
Ham Radio Circuits and Repair / Re: TS-520 Hi Voltage Cap Question
« on: November 25, 2019, 08:35:30 PM »
Then get someone else to change them if you do not feel comfortable. However, I agree they should be changed very soon.
5
Ham Radio Circuits and Repair / Re: TS-520 Hi Voltage Cap Question
« on: November 19, 2019, 11:59:32 PM »
If you are referring to C19 and C20 you should be fine going to 150µF. This will give you 75µF total being that they are in series. I would not go much more than that though on the B+ line. You would be fine staying at 100µF also. As far as voltage more is better for sure. You will essentially have made a 75µF 1200V cap! That is 400V above the B+ so you should be safe there. 
6
New member welcome / Re: Hello from Alabama
« on: November 07, 2019, 08:49:29 PM »
Welcome to the forum!!
Would love to see pics of the stuff you mentioned above.
Michael, KE4EST
Would love to see pics of the stuff you mentioned above.
Michael, KE4EST
7
New member welcome / Re: New to the Forum
« on: November 03, 2019, 12:37:42 AM »
Welcome to the forum Greg!
8
New member welcome / Re: Hello from Delaware
« on: October 05, 2019, 06:48:17 PM »
Welcome to the forum shadetree!
9
Post your Shack, Shop, Repair room / Re: Just getting off of the ground
« on: September 19, 2019, 05:44:13 PM »
Looks great!
10
New member welcome / Re: Hi Fr0M EU France
« on: August 18, 2019, 11:02:09 PM »
Welcome to the forum st3ph!
11
Other Video Blogs / Re: GE Table Top Restore from the 70's
« on: July 21, 2019, 10:29:19 PM »
BTW Welcome to the forum Ron!!!!
12
Other Video Blogs / Re: GE Table Top Restore from the 70's
« on: July 21, 2019, 10:28:27 PM »
I would go ahead a replace them. If a cap goes shorted it can and will take out other parts and make things harder to repair.
15
Test Equipment / Re: Com Ser Laboratories tear down possible repair
« on: March 26, 2019, 07:01:01 AM »
That is what I am wondering..... Price?