Over The Air > Ham Radio Circuits and Repair
Reprogramming a Icon IC-745 ram board
The Radio Shop:
This is a project I will be working on. There were several DOS base programmers made to read and write the content of the ram boards for the 745 and 751 radios.
The problem is they were all DOS base and used the computers printer port to send and receive data.
What I like to do is come up with a USB based programmer to do the same.
I will be adding lots of files and pictures to this thread over the next few days.
The Radio Shop:
This is the N2CBV programmer
The Radio Shop:
This is the RW3XA programmer
The Radio Shop:
Icom programming program
n2cbu
http://jvgavila.com/soft_ham/icom/ICOMRAM.ZIP
The Radio Shop:
745 hex
http://jvgavila.com/soft_ham/icom/IC745FIN.HEX
745 bin
http://jvgavila.com/soft_ham/icom/IC745FIN.BIN
Navigation
[0] Message Index
[#] Next page
Go to full version