Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - The Radio Shop

Pages: 1 ... 4 5 [6] 7 8 ... 54
76
Electronic Video Blog / #148 More Icom IC 745 Repairs
« on: June 16, 2018, 04:01:09 PM »




77
Electronic Video Blog / #147 Quick Look at a rare radio SBE sb-36
« on: June 16, 2018, 04:00:07 PM »





78
Electronic Video Blog / #146 Johnson Valiant Quick Repair
« on: June 16, 2018, 03:57:04 PM »




79
Home Brew And Tech Forum / FT-101 extender card printout for toner transfer
« on: June 02, 2018, 05:22:06 PM »
Use paint to edit.
Print these out and transfer to circuit boards to make your own extender boards for the Yaesu FT-101

80
Signal Generators / Clough Brengle 110 signal generator manual
« on: May 26, 2018, 09:49:58 AM »
Take a look at the specs here
https://www.radiomuseum.org/r/clough_110.html

Download the schematic and documentation below.

The CB-110 outputs a signal at 100 KHz to 31 MHz.
Output level .05uV to 100 mV
Modulation at 400 Hz







81
The Old Tractor Forum / Re: 1950 Massey Harris Pony
« on: May 14, 2018, 08:57:07 PM »
The AC were good tractors. Cut my teeth on a B model when I was 7 years old.

Thanks

Working on putting a 3 point hitch on this one now.

82
Ham Radio Circuits and Repair / Re: Old Knightkit 50 watt transmitter capacitors
« on: May 11, 2018, 09:53:55 PM »
Sounds like a winner. Let us know how it goes.

83
Ham Radio Circuits and Repair / Re: Old Knightkit 50 watt transmitter capacitors
« on: May 08, 2018, 06:13:18 PM »
Hi Bill and welcome.
I would need to research those capacitors. 700 volt caps are rare to find these days. Have you tried Hayseed hamfest?
They may have them.

When I need caps like that I put them in series and then put a piece of heat shrink around them making it look like one capacitor.
I have not seen a knight transmitter in so long I am not sure of how the inside looks.

Also thanks for watching the videos.

Buddy

84
The Old Tractor Forum / Re: 1950 Massey Harris Pony
« on: April 20, 2018, 01:12:55 PM »
Gave the tractor a bath today. Looks much better

85
The Old Tractor Forum / Re: 1950 Massey Harris Pony
« on: April 14, 2018, 09:41:34 AM »
ID TAG

The list does not tell me the year.

86
The Old Tractor Forum / Re: 1950 Massey Harris Pony
« on: April 13, 2018, 04:37:45 PM »
Someone got creative and used old forklift valve and cylinder to give hydraulics to the lift. They used a ford power steer pump to make it work.
Really works good.

87
The Old Tractor Forum / 1949 Massey Harris Pony
« on: April 13, 2018, 04:24:52 PM »
A real tractor to restore.
This one already runs great.
Even has hydraulics. Not stock but homemade.

88
Ham Radio Circuits and Repair / Re: President HR 2510 CPU/PLL issues
« on: March 09, 2018, 05:51:33 PM »
Robb,
Sorry, not much time to internet here. Been so busy with work.
I do not know of any links about the cpu board.  There is not a lot of information out there on these. If I find something I will post it up for you.

89
Signal Generators / Re: B&K 1040 user manual
« on: March 02, 2018, 03:14:39 PM »
Thanks for that sonoma. Appreciate it.

90
New member welcome / Re: Hello from the Pacific Northwest
« on: February 23, 2018, 09:30:11 PM »
Hi and welcome to the forum. There is not a lot of activity here but I do have regular check ins. Hope that it will get better soon.
Glad you like the videos. Thanks. Radio is a fun hobby.
Thanks for sharing your story and please stick around.

Pages: 1 ... 4 5 [6] 7 8 ... 54